Cantech
Facebook
Youtube
Instagram
Twitter

Construction

Home / Construction / Construction Tapes / Flashing Tape

505 - Flashing Tape

Application
  • Waterproof flashing membrane used to seal openings around windows and doors.
  • Recommended on aluminum, wood, wood clad, fiberglass, vinyl windows and doors.
  • Recommended on most house wraps, OSB, exterior gypsum and fibre board.
  • All above surfaces have to be dry and clean in order to assure proper contact.
Benefits
  • Meets all AAMA 711-13 requirements, Type A, Level 2.
  • High shear adhesive provides excellent initial tack to surfaces.
  • Strong and durable holding power.
  • No primer required (AAMA 711-13 Type A) when applied on proper surfaces.
  • Film is flexible and conforms well around surfaces.
  • Seals around fasteners and nails.
  • Water and moisture resistant.
  • Prevents air infiltration.
  • Excellent resistance to UV.
Code  
Colour  
Dimensions  
Units
50502  
Red
100 mm x 22.86 m
 
50530  
Red
304 mm x 22.86 m
 
50552  
Red
152 mm x 22.86 m
 
50590  
Red
228 mm x 22.86 m
 
Backing Multi-layer UV protected polyethylene film
Adhesive UV cured acrylic
Total Thickness 0.22 mm • 8.5 mil
Adhesion 109 N/100mm • 100 oz/inch
Tensile Strength 245 N/100mm • 14 lb/inch
Application Temperature -10C° (14°F) • 50C° (122°F)
Water Vapor Transmission (ASTM E96) 0.462 perms (gr/ft2/hr/in-Hg)
Water Penetration Rate (ASTM D3816) 0.5 g/100 in2 / 24hr
Elongation 650%
Meets US Specification AAMA 711-13 (Type A, Level 2)

 

Please note:
The technical characteristics quoted are averages only and may vary within industry tolerances.
The final user must assure product suitability for the application and assumes all risks and liabilities.